Hayden Nickell Posted July 12, 2023 Report Share Posted July 12, 2023 Hey everyone, My family just picked up a 23' B52 Alpha this year and we have been trying to dial in the surf wave as much as possible. We fill everything up 100% and run the pumps for 10 minutes before we start surfing. We don't run any additional ballast or weight either. We have found that this with a 19% trim tab at 11 mph has created a monster wave, whether there are a lot of people on the boat or not. I am interested in hearing the settings you all use because I would love to test out different waves and try and get a feel for what works best. Thank you! Quote Link to comment Share on other sites More sharing options...
Tsdahc Posted February 24, 2024 Report Share Posted February 24, 2024 I test drove and am purchasing a 2023 B52 and this is how I set up the boat. With 2 people I did find sometimes I needed to let a little out of the starboard ballast to clean up the regular wave, but that’s about it. Otherwise almost exactly how you describe. Quote Link to comment Share on other sites More sharing options...
oboyskibum Posted February 27, 2024 Report Share Posted February 27, 2024 I have a 2021 B52 Alpha 575 Beast. I run it 100% full ballast, with additional weight of 200lb in the nose 150lb midship on each side, and 50 lb in each rear locker. 11-11.3mph, no trim (sometimes a little tab on goffy side to flatten the wave), no cleanup required even with 2 people. Typically don't have more than 6-8 people onboard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.