pwhicksjr Posted November 12, 2018 Report Share Posted November 12, 2018 When I was draining the water from the boat today, I noticed my PnP bags came installed reversed: Port and Starboard. I have never seen these installed or removed. The red connector on the vent and fill lines look normal compared to YouTube University for other boats. What do I need to know are out the PnP connection to the hard tanks? My Starboard side bag always pops out my cup holders and I’m guessing these bags are different enough that they would not go out of there way to label them otherwise. Thank you for the assist! Quote Link to comment Share on other sites More sharing options...
hot4teach Posted November 13, 2018 Report Share Posted November 13, 2018 Just grab the aluminum ring and pull it up. pwhicksjr 1 Quote Link to comment Share on other sites More sharing options...
kodenine Posted October 12, 2021 Report Share Posted October 12, 2021 I have a 2022 B52 Alpha 23'. I'm trying to pull the rear pnp bags. How do you remove the connection to the hard tank? Quote Link to comment Share on other sites More sharing options...
kodenine Posted October 12, 2021 Report Share Posted October 12, 2021 I was able to find the 4 screws around the hard tank connector. I've unscrewed those. It looks like their may be some sealer around the connector based on the fact that the end of the screws had some clear sealant on the ends. Even with the screws out I'm having trouble getting the connector out. It looks like their may be holes between the screw holes, but they don't seem to fit the screws I pulled out. Is there any other secret to get this out? Quote Link to comment Share on other sites More sharing options...
kodenine Posted October 13, 2021 Report Share Posted October 13, 2021 So I talked to the dealer and they said they were not designed to come out. I was really hoping to be able to take them out for the winter to make sure I could get all of the water out of them. Quote Link to comment Share on other sites More sharing options...
bloodiestcadaver Posted October 13, 2021 Report Share Posted October 13, 2021 1 hour ago, kodenine said: So I talked to the dealer and they said they were not designed to come out. I was really hoping to be able to take them out for the winter to make sure I could get all of the water out of them. Thats weird that they changed that. They are a bugger but when pulled slow and straight they usually slight right out kodenine 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.