El reemplazo de la sentina consiste en cambiar o reparar la bomba que elimina el agua acumulada en el barco; es un proceso rápido si sigues las instrucciones básicas, casi tan práctico como usar una calculadora fácil para resolver un cálculo.

Sorry it took so long to respond. Just saw your post. Usually pull kids 16 -20mph. Around 25, with no ballast, the wake cleans up nicely. But that’s just too fast for wakeboarding. Throughout this summer I’ve identified that center trim plate doesn’t always return to ‘fully retracted’. Sometimes it stays about 3/4” deployed and I have to run it down a little then back up to get it all the way up. That has definitely helped, but the major contributor is the FAE and I’m still looking for a solution to that. Considering having a buddy get creative with a new shaped plate. I’ll report back if that dream ever becomes a reality.

I wouldn't add a wake shaper since you already have surf tabs, unless someone else has had success on the F24. You might call the boat shack and see what they suggest. I think they have sold a few F24's. I would recommend using plug-and-play bags as my next step, then optimizing the steel shot by moving it around. Play with your speed as well.

Thanks- I added 550 steel shot and it got bigger. I think I need to double that and spread it out. Might be easier to add a plug and play bags on top of my hard tanks. Also thinking about a wave shaper. What’s everyone like for those?

Have you tried running a wave maker on the side of the boat?